Image or Sound Problems

No image appears or the No Signal message is displayed.

■Check that the Power light is green and not flashing and the lens cover is off. If the Power light is orange, the projector is in sleep mode; press the Power button to wake it up.

■Your computer’s screen saver may be on. Press a key on the computer keyboard.

■The A/VMute feature may be turned on. Press the A/VMute button on the remote control to turn it off, if necessary.

■Make sure the cables are connected correctly, as described in Chapter 1.

■Make sure the correct image source is selected. Press the Source button on top of the projector if necessary.

■Try restarting your computer. You may need to set the display to appear on both the LCD screen and the projector, or to switch between them. See page 25 and check your laptop documentation for instructions.

The Not Supported message is displayed.

The current video signal is not compatible with your projector. See page 62 for a list of compatible signals.

The image isn’t square, but a trapezoid (keystone) shape.

This is caused by the projector not facing the screen squarely or by extending the projector’s legs to position the image. Position the projector to face the screen squarely or press and hold the + or – side of the Keystone button on top of the projector until the image is squared-up.

54Solving Problems