Adjusting the Image
You can make a variety of image adjustments with the Video menu. The options available in the menu depend on which source is connected to the projector: computer or video.
Computer or component video source menuVideo source menu
Video menu
Menu item | Description |
|
|
Position | Moves the displayed image up, down, left, or right. Use the Enter button to move the |
| screen position in the corresponding direction. |
|
|
Tracking* | Removes vertical lines from the computer image by matching the projector’s internal |
| clock to various computer graphic signals. |
|
|
Sync* | Corrects fuzziness or screen flicker by synchronizing the projector with the computer’s |
| tracking signal. Always adjust the Tracking before adjusting the Sync. |
|
|
Brightness | Lightens or darkens the overall image. Increase brightness to lighten an image, or |
| decrease it to darken the image. Press the right or left side of the Enter button to |
| adjust the setting and see the results. |
|
|
Contrast | Adjusts the difference between light and dark areas. Increase the contrast to make |
| light areas lighter and dark areas darker. Decrease it to minimize the difference |
| between light and dark areas. Press the right or left side of the Enter button to adjust |
| the setting and see the results. |
|
|
Color** | Adjusts the color depth of the video input source. Increase the color setting for more |
| intense color on the screen, and lower the setting for less intense color. Press the |
| right or left side of the Enter button to adjust the setting and see the results. |
|
|
Tint** | Adjusts the tint of the video image colors. Increasing the Tint setting strengthens the |
| red tint. Decreasing it strengthens the green tint. Press the right or left side of the |
| Enter button to adjust the setting and see the results. |
|
|