note

If the image is noticeably uneven after keystone correction, reduce the Sharpness setting using the Video menu; see page 39 for instructions.

Adjusting the Image Shape

If the projected image isn’t square or has a “keystone” shape, do one or more of the following:

■If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly

in front of the center of the screen, facing the screen squarely.

■If your image looks like or , press the + or — side of the Keystone button to correct the shape of the image. The

Keystone button corrects up to a 15° tilt. After correction, your image will be slightly smaller.

Keystone button

You can also perform electronic keystone correction using the projector’s Setting menu. See page 42 for instructions.

note

You can also increase computer image clarity by pressing the Auto button on the remote control to optimize the tracking, sync, and position settings. Turn off E-Zoom and A/VMute before using the Auto button; see page 28 and page 34.

Adjusting the Image Quality

You may need to adjust the projector’s Tracking and Sync settings if your computer image has any of these quality problems:

■Flashing or blurry image

■Vertical or horizontal stripes

■Only a portion of the image is displayed

See Chapter 3 for instructions on adjusting these settings in the projector’s Video menu.

30Using the Projector