Tips for Using the Paper Feeder
Following the tips below will give you the best performance when printing with the paper feeder.
Load paper into the paper feeder before you turn on the printer and send data. When the printer receives data from the computer, it loads a single sheet automatically and begins to print.
If the printer runs out of paper during a print job, reload the paper feeder and then press the LOAD/EJECT button to continue printing.
Press the LOAD/EJECT button if you need to eject a sheet of loaded paper.
You can switch to manual loading to feed single sheets or envelopes without removing the paper supply from the paper feeder. For instructions, see “Loading Paper Manually” in Chapter 2.
You can adjust the loading and print positions with the printer’s micro feed feature. See “Controlling the Page with Micro Feed” in Chapter 2. Because most application programs take care of the top and bottom margins, you should usually adjust the margins by using your programs, taking the printer’s default loading position into account.
The default page length for paper loaded from the paper feeder is 61 lines
If the ink does not dry fast enough, try removing sheets one at a time as they finish printing.