Adjusting the loading position

The loading position is the position of the paper when the printer loads it from the paper feeder or the manual feed slot. If printing is too high or low on the page, you can change the loading position with the micro-feed feature as follows:

1.Make sure the printer is turned on.

2.Load a sheet of paper from the paper feeder by pressing the LOAD/EJECT button, or from the manual feed slot by inserting it into the slot.

3.Open the paper feeder cover.

4.As soon as the paper is loaded, hold down the ALT button and press the ECONOMY/CONDENSED button to move the loading position up l/ 180 inch, or the FONT button to move the loading position down 1 / 180 inch. Continue pressing the appropriate buttons until you reach the position you want.

The pointer on the print head indicates the base line of printed characters. (You may have to experiment a few times to get the

results you want.)

pointer

/ ink cartridge

5.Close the paper feeder cover.

6.Send data from the computer to start printing.

Using Other Printer Functions 2-9