N o t e :

UThe printer has a minimum and maximum loading position. If you try to move the loading position beyond these limits, the printer beeps and the paper stops moving.

3When the paper reaches the factory-setloading position, the printer beeps. Use the factory setting as a reference point when adjusting the loading position.

Adjusting the print position

The print position is the position on the page where the print head actually prints during a print job. If you want to change the current print position, you can use the micro-feed feature as follows:

1.Press the PAUSE button to stop printing; the PAUSE light comes on.

2.Hold down the ALT button and press the ECONOMY/ CONDENSED (up) or FONT (down) button to adjust the print position on the page.

3.Press the PAUSE button again to resume printing. (You may have to experiment a few times to get the results you want.)

N o t e :

The printer has a limit - 8.0 mm (0.31 inch) - to the amount you can move the print position backwards using microfeed. Feeding stops when you reach this limit.

2-10 Using Other Printer Functions