After you customize your print settings, you can save them as a group so you can reuse them whenever you print a similar project.
The default Gamma setting of 1.8 provides the optimum contrast quality for your photos. However, you can change it to either 1.5 (for decreased contrast) or 2.2 (for increased contrast; recommended for matching colors with sRGB devices).
For more details on the printer settings, see your electronic Reference Guide, as described on page 2.
Printing on Envelopes
You can load up to 10 envelopes at a time, flap edge first and printable side up. Place them against the right edge guide and slide the left edge guide against them.
(You’ll get better results if you press each envelope flat before loading it, or load one envelope at a time.)
Set the thickness lever to the + position when you print on envelopes or other thick media. (Return the lever to the
0 position before you print on regular paper.)
Select Plain paper as the Media Type setting and choose the
correct envelope size as the Paper Size setting.
Lever position for envelopes and thick paper
If the printing smears or you have banding (light lines), try turning off High Speed printing in the Advanced dialog box. (See your electronic Reference Guide for instructions on accessing the dialog box.)
16