1Make sure PictureMate is on.

2Make sure there are no memory cards in PictureMate’s memory card slots. The card light should be off.

Note: If a memory card is inserted, the printer will read photos from the card, not from an external drive.

3If PictureMate is connected to a computer, disconnect it or turn off the computer.

4Connect your CD or Zip drive’s USB cable, or plug your flash memory drive into the EXT/IF port on the back of PictureMate.

5For a CD or Zip drive, insert a CD or Zip disk with photos into the drive.

If you used PictureMate to save photos on the same CD-R, Zip disk, or flash memory drive more than once, it will have multiple folders. You see this message:

Press or to choose the folder where your photos are stored, then press OK. The most recently saved folder has the largest number.

29