Epson CPD-17732R2 Prepare to Print and Use the Wizard, Load Paper

Before you can print, you need to load paper and insert your memory card in PictureMate.

2Slide the top part of the paper support up gently until it clicks into place.

Follow these steps to load PictureMate Photo Paper:

Caution: Don’t load plain paper; this may damage PictureMate.

1Move the handle to the back and down. Then open the paper support and output tray.

Open paper support

Move handle to the back

and down

Open output tray

Note: Keep the handle all the way down when printing, to allow paper to feed through.

3Place your paper against the right edge, with the glossy side up.

Load glossy side up

Edge guide

Note: Make sure paper is glossy side up to prevent smearing.

4Slide the left edge guide against the paper. Make sure it is snug, but not so tight that paper can’t move.

Note: When you need more paper, order a PictureMate Print Pack. See page 33 for more information.