Remove the Used Photo Cartridge
Make sure you have a new PictureMate photo cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session.
Caution: Before you replace the cartridge, read the “Photo Cartridge Safety Instructions” on page 53.
1If PictureMate is on, press the 
On button to turn it off.
2Wait until the LCD screen goes blank, then disconnect the power cable and USB cable if connected.
3Flip the handle over to the front.
4Open the cartridge door on the back of PictureMate.
5Move the lever to the Release position by sliding it in the direction shown. This releases the cartridge.
34