Notices

Important Safety Instructions

Before using your PictureMate, read the following safety instructions to make sure you use it safely and effectively:

●Be sure to follow all warnings and instructions marked on the printer.

●Do not insert objects through the slots in the printer.

●Take care not to spill liquid on the printer and the AC adapter.

●Do not put your hand inside the printer or touch the photo cartridge during printing.

●Always turn the printer off using the On button. Do not unplug the printer or turn off the power to the outlet until the power light goes out.

●Before transporting the printer, make sure that the photo cartridge is installed.

●Leave the photo cartridge installed. Removing the cartridge can dehydrate the print head and may prevent the printer from printing or cause ink to leak out.

●Do not remove the memory card or turn off the printer while the computer and the memory card are communicating (when the memory card light is flashing).

●The methods for using memory cards vary according to card type. Be sure to refer to the documentation packaged with your memory card for details.

●Use only memory cards compatible with the printer.

●Place the printer on a flat, stable surface that extends beyond the base of the printer in all directions. The printer will not operate properly if it is tilted at an angle. If you place the printer by the wall, leave more than 4 inches (10 cm) between the back of the printer and the wall.

●When storing or transporting the printer, do not tilt it, stand it on its side, or turn it upside down. Otherwise, ink may leak from the cartridge.

●Leave enough space in front of the printer for the paper to be fully ejected.

●Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer and the AC adapter away from direct sunlight, strong light, water, or heat sources.

● Do not leave the printer in places subject to high temperature, such as your car. Otherwise the printer may be damaged or ink may leak.

●Avoid places subject to dust, shock, or vibration.

●Leave enough room around the printer to allow for sufficient ventilation.

WARNING: This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling the power supply.

52