Adjusting the Image Quality

B Adjust the tracking until the vertical stripes disappear from the image.

Using the remote control

Using the control panel

The tracking value increases or decreases each time a button is pressed.

C Pressmenu.the [Menu] button to exit the configuration

The image will flash when continuous tracking adjustment is carried out, but this is normal.

14

Adjusting the Sync

If flickering, fuzziness or interference appear in computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Sync (synchronisation)g manually using the following procedure.

PROCEDURE

A Select "Signal" from the configuration menu, and then select "Sync.".

For details on this operation, refer to "Using the Configuration Menu". sp.32

Check the buttons you can use and the operations they perform in the guide at the bottom of the screen.

Using the remote control

Using the control panel