Problems Solving

54

 

 

The remote control does not work

Check

Remedy

 

 

Is the remote control light-emitting area

Face the remote control towards the remote control light-receiving area.

facing towards the remote control light-

The operating angle for the remote control is approximately ±30º horizontally and approximately ±15º

receiving area when it is operated?

vertically. sp.i

 

 

Is the remote control too far from the

The operating range for the remote control is approximately 6m. sp.i

projector?

 

 

 

Is direct sunlight or strong light from

Set the projector up in a location where strong light will not shine onto the remote control light-receiving

fluorescent lamps shining onto the

area.

remote control light-receiving area?

 

 

 

Are the batteries dead, or have the

Insert new batteries, while making sure that they are inserted the correct way around. sp.58

batteries been inserted correctly?

 

 

 

Has a remote control button been pressed

If any of the buttons on the remote control are pressed down for more than 30 seconds, the remote control

for more than 30 seconds?

stops sending signals (remote control's sleep mode) . The purpose of this is to prevent the batteries from

 

being consumed due to something being placed on top of the remote control.

 

When the button is released, normal remote control operation will resume.