Epson EMP-62, EMP-X3 Changing the Projected Image (Source Search), A Perform the Source Search, Changing Directly from the Remote Control

Changing the Projected Image (Source Search) 18

Automatically Detect Incoming Signals and Change the Projected Image (Source Search)

The picture signal input from the connected equipment is automatically detected and projected.

Computer S-Video Video

Skip

When using the EMP-X3

PROCEDURE

A Perform the Source Search.

Using the Remote Control Using the Control Panel

B The screen being searched for is displayed, and then the image is projected.

When two or more pieces of equipment are connected, press the [Source Search] button until the target image is projected.

•When your video equipment is connected, start playback.

•The following screen is displayed when only the picture signal projected now is input, or when no picture signal is input. You can choose the input source from this screen.

When using the EMP-X3

Changing Directly from the Remote Control

You can use the remote control to change directly to the target input source.

Remote Control

Changes to the image from the Computer port.

Changes to the image	Changes to the image
from the S-Video port.	from the Video port.