Epson EMP-62, EMP-X3 Problems relating to images

	Problems Solving	48
	Problems Solving	48

Problems relating to images

No images appear

		Check			Remedy

Was the [Power] button pressed?					Press the [Power] button to turn the power on.

Are the indicators switched off?					The power cable is not connected correctly or power is not being supplied normally. Connect the
					projector's power cable correctly. sp.iii
					Check that your power supply socket is working.

Is A/V Mute mode active?					Press the [A/V Mute] button on the remote control to cancel the mute. sp.20

Have the configuration menu settings					Reset all of the settings. "Reset" - "Reset All" sp.40
been made correctly?

Is the projected image completely black?					Some input images, such as screen savers, may be completely black.

	Only when projecting computer images


Are the image signal format settings					If a composite videog or S-Videogsource is connected to the projector, use the "Video Signal" menu
correct?					command to select the signal format. "Signal" - "Video Signal" sp.35

		Only when projecting images
		from a video source


	Projection stops automatically



		Check			Remedy

Is "Sleep Mode" set to "On"?					When the "Sleep Mode" menu command has been set to "On", the lamp turns off automatically if no
					operations are carried out for about 30 minutes while no video signal is being input. The Power indicator
					is lit orange at this time. Press the [Power] button to turn the power on. If you do not want sleep mode to
					be used, change the "Sleep Mode" setting to "Off". "Extended" - "Operation" - "Sleep Mode" sp.38

Contents

Page Projection Procedure Connecting to Visual Equipment Turning on and Projecting Setup Connecting to Visual Equipment Turning on and Projecting Notations Used in This Guide Contents Appendices Projector Features Page Part Names and Functions Control Panel •[Menu] button sp.32 •[Power] button sp.iii • Indicatorstates sp.44 Rear (EMP-X3) •Computer port sp.i • S-Videoport • Video port • USB port sp.23, p.70 Rear (EMP-82/62) • Computer1 port sp.ii • Computer2 port sp.ii • Audio port sp.ii •S-Videoport sp.ii Base • Foot adjust lever • Front adjustable foot • Lens cover string attaching stay •Air intake vent sp.57 Remote Control • [Page down] [Page up] buttons sp.24 • Remote control light-emittingarea sp.i • [E-Zoom]button ( ) ( ) sp.22 • [Power] button sp.iii Adjusting and changing the image Adjusting the Image Quality 13 Adjusting the Volume Changing the Projected Image (Source Search) Adjusting the Image Quality B Adjust the tracking until the vertical stripes disappear from the image C Pressmenu.the [Menu] button to exit the configuration Adjusting the Sync A Select "Signal" from the configuration menu, and then select "Sync tracking contrast Selecting the Projection Quality (Color Mode) p.33 Adjusting the Volume Changing the Projected Image (Source Search) Useful Functions Functions for Enhancing Projection Security functions Functions for Enhancing Projection Changing the Aspect Ratio (Resizing) Displaying the Pointer (Pointer) A Display the pointer You can also make this setting using the "Resize" command in the "Signal" menu B Move the pointer icon sp.36 Enlarging Part of the Image (E-Zoom) A Start E-Zoom B Move the cross to the area of the image that is to be enlarged or reduced C Enlarge Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) Page Page Security functions Setting Password Protect A Holdseconds.down the [Freeze] button for approximately B Turn "Power On Protect" on Turn "Password Timer" on E Enter the password Turn "User’s Logo Protect" on Operation Button Lock Function A From the configuration menu, select "Settings" - "Operation Lock B Set to "On C When"Yes".the confirmation message is displayed, select There are two methods to cancel the projector's control panel lock Configuration Menu Using the Configuration Menu List of Functions Using the Configuration Menu List of Functions "Signal" Menu Page "Settings" Menu "Extended" Menu Page "Info" Menu "Reset" Menu Troubleshooting Using the Help Problems Solving Using the Help Page Problems Solving Lamp or Temp indicator flashes orange Page When the Indicators Provide No Help Problems relating to images Page Page Page Page Problems when projection starts Other problems Page Appendices Installation Maintenance Saving a User's Logo Connecting to External Output Equipment Installation Maintenance Replacing Consumables Replacing the batteries A Remove the battery cover B Insert the batteries C Replace the battery cover Lamp Replacement Period "Brightness Control" sp.36 ·When used continuously at high brightness: Approx. 1900 hours ·When used continuously at low brightness: Approx. 2900 hours •Contact your dealer for a spare lamp C Loosen the two lamp fixing screws D Take out the lamp E Install the new lamp F Install the lamp cover Resetting the Lamp Operating Time A Connect the power cable and turn on the projector C When "Execute?" appears, select "Yes Replacing the Air Filter B Remove the air filter C Install the new air filter Dispose of used air filters properly in accordance with your local regulations Air filter frame: Polycarbonate, ABS plastic Saving a User's Logo C When "Choose this image as the User's Logo?" appears, select "Yes User's logos can be saved at up to 400 ⋅ 300 dots in size E When "Select this image?" appears, select "Yes F Selectscreen.the zoom rate from the Zoom rate setting G When "Save this image?" is displayed, select "Yes Connecting to External Output Equipment Optional Accessories and Consumables Glossary Page List of ESC/VP21 Commands Serial connection (EMP-82/62only) USB Connection Setup A Download the USB driver (USB-COMDriver) from the EPSON website to your computer B Install the downloaded USB driver onto your List of Supported Monitor Displays Specifications Page Page Appearance EMP-82/62 Index Page General Notice: