Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-62, EMP-X3 E When "Select this image?" appears, select "Yes, G When "Save this image?" is displayed, select "Yes

1 85

Download 85 pages, 4.24 Mb

Saving a User's Logo

C When "Choose this image as the User's Logo?" appears, select "Yes".

When you press the [Enter] button on either the remote control or the projector's control panel, the image signal will be displayed at their original resolution, so if a signal with a resolution that is different from the panel resolution of the projector is projected, or if a video image is being projected, the display size will change.

D The image to be recorded and a selection marquee box will be displayed. Move the marquee box to select the part of the image to use.

Using the remote control

Using the control panel

65

User's logos can be saved at up to 400 ⋅ 300 dots in size.E When "Select this image?" appears, select "Yes".F Selectscreen.the zoom rate from the Zoom rate settingG When "Save this image?" is displayed, select "Yes".

The image will then be saved. Once the image has been saved, the message "Completed." will be displayed.

•Saving the user's logo may take a few moments (about 15 seconds). Do not use the projector or any other sources which are connected to the projector while the user's logo is being saved, otherwise it may result in errors in projector operation.

•Once a user's logo has been saved, the logo setting cannot be returned to the factory default.

Contents

Page Projection Procedure Connecting to Visual Equipment Turning on and Projecting Setup Connecting to Visual Equipment Turning on and Projecting Notations Used in This Guide Contents Appendices Projector Features Page Part Names and Functions Control Panel •[Menu] button sp.32 •[Power] button sp.iii • Indicatorstates sp.44 Rear (EMP-X3) •Computer port sp.i • S-Videoport • Video port • USB port sp.23, p.70 Rear (EMP-82/62) • Computer1 port sp.ii • Computer2 port sp.ii • Audio port sp.ii •S-Videoport sp.ii Base • Foot adjust lever • Front adjustable foot • Lens cover string attaching stay •Air intake vent sp.57 Remote Control • [Page down] [Page up] buttons sp.24 • Remote control light-emittingarea sp.i • [E-Zoom]button ( ) ( ) sp.22 • [Power] button sp.iii Adjusting and changing the image Adjusting the Image Quality 13 Adjusting the Volume Changing the Projected Image (Source Search) Adjusting the Image Quality B Adjust the tracking until the vertical stripes disappear from the image C Pressmenu.the [Menu] button to exit the configuration Adjusting the Sync A Select "Signal" from the configuration menu, and then select "Sync tracking contrast Selecting the Projection Quality (Color Mode) p.33 Adjusting the Volume Changing the Projected Image (Source Search) Useful Functions Functions for Enhancing Projection Security functions Functions for Enhancing Projection Changing the Aspect Ratio (Resizing) Displaying the Pointer (Pointer) A Display the pointer You can also make this setting using the "Resize" command in the "Signal" menu B Move the pointer icon sp.36 Enlarging Part of the Image (E-Zoom) A Start E-Zoom B Move the cross to the area of the image that is to be enlarged or reduced C Enlarge Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) Page Page Security functions Setting Password Protect A Holdseconds.down the [Freeze] button for approximately B Turn "Power On Protect" on Turn "Password Timer" on E Enter the password Turn "User’s Logo Protect" on Operation Button Lock Function A From the configuration menu, select "Settings" - "Operation Lock B Set to "On C When"Yes".the confirmation message is displayed, select There are two methods to cancel the projector's control panel lock Configuration Menu Using the Configuration Menu List of Functions Using the Configuration Menu List of Functions "Signal" Menu Page "Settings" Menu "Extended" Menu Page "Info" Menu "Reset" Menu Troubleshooting Using the Help Problems Solving Using the Help Page Problems Solving Lamp or Temp indicator flashes orange Page When the Indicators Provide No Help Problems relating to images Page Page Page Page Problems when projection starts Other problems Page Appendices Installation Maintenance Saving a User's Logo Connecting to External Output Equipment Installation Maintenance Replacing Consumables Replacing the batteries A Remove the battery cover B Insert the batteries C Replace the battery cover Lamp Replacement Period "Brightness Control" sp.36 ·When used continuously at high brightness: Approx. 1900 hours ·When used continuously at low brightness: Approx. 2900 hours •Contact your dealer for a spare lamp C Loosen the two lamp fixing screws D Take out the lamp E Install the new lamp F Install the lamp cover Resetting the Lamp Operating Time A Connect the power cable and turn on the projector C When "Execute?" appears, select "Yes Replacing the Air Filter B Remove the air filter C Install the new air filter Dispose of used air filters properly in accordance with your local regulations Air filter frame: Polycarbonate, ABS plastic Saving a User's Logo C When "Choose this image as the User's Logo?" appears, select "Yes User's logos can be saved at up to 400 ⋅ 300 dots in size E When "Select this image?" appears, select "Yes F Selectscreen.the zoom rate from the Zoom rate setting G When "Save this image?" is displayed, select "Yes Connecting to External Output Equipment Optional Accessories and Consumables Glossary Page List of ESC/VP21 Commands Serial connection (EMP-82/62only) USB Connection Setup A Download the USB driver (USB-COMDriver) from the EPSON website to your computer B Install the downloaded USB driver onto your List of Supported Monitor Displays Specifications Page Page Appearance EMP-82/62 Index Page General Notice: