Security functions

28

 

 

C

D

Turn "Password Timer" on.E Enter the password.

If you don't use this setting, proceed to step 4.

(1)

To set a password, select "Password" and then press the

(1)

Select "Password Timer", and then press the [Enter]

 

[Enter] button.

 

button.

(2)

The message "Change the password?" will be displayed,

(2)

Select "On", and then press the [Enter] button.

 

so select "Yes" and then press the [Enter] button. The

(3)

Press the [Esc] button.

 

default setting for the password is "0000", but you should

(4)

Select "Timer" and then press the [Enter] button.

 

change this to your own desired password. If you select

(5)

While holding down the [Num] button, use the numeric

 

"No", the screen shown at step 1 will be displayed again.

 

keypad buttons to enter the setting time within the range of

(3)

While holding down the [Num] button, use the numeric

 

1 to 9999 hours and then press the [Enter] button.

 

keypad buttons to enter a 4-digit number. The number

 

If you make a mistake entering the time, press the [Esc]

 

entered will be displayed as "* * * *". Once four digits

 

button and re-enter the time.

 

have been entered, the confirmation screen will be

 

When you have finished using the "Password Protect"

 

displayed.

 

menu, the countdown for the elapsed time will start.

(4)

Re-enter the password.

 

 

 

 

The message "The new password is stored." will be

 

 

 

 

Turn "User’s Logo Protect" on.

 

displayed. If you enter the password incorrectly, a message

(1)

Select "User’s Logo Protect", and then press the [Enter]

 

will be displayed prompting you to re-enter the password.

 

 

button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.