26
EMP-735 User’s Guide
Turning On the Power and Projecting Images
Procedure
1Check that the Power indicator has
stopped flashing and is lit orange.
2Turn on the power for all equipment connected to the projector.
For a video source, press the [Play] button at the video source to start
playback if necessary.
3Press the [Power] button on either
the projector's control panel or the
remote control to turn on the power
for the projector.
The Power indicator flashes green. After a
short period it stops flashing and lights
steadily, and projection starts.
Wait until the Power indicator lights green
(it normally takes about 40 seconds to
change).
Tip :
• The [Power] button on both the projector's control panel and the remote control cannot
be operated whilst the Power indicator is flashing green.
• Depending on the settings, the message "No-Signal." may appear. See "Setting" - "No-
Signal Msg." ( p.50)
Lit orangeLit orange
Color Mode
Menu A/V Mute
E-Zoom
Freeze
S-Video/Video
Comp/Easy MP
Page upPage down
Power
ESCAuto
Enter
Remote control
Changes from flashing to lit green
Turning On the Projector