92
EMP-735 User’s Guide
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
Use the remote control to carry out the operations for recording a user's logo.
Tip :
When a user's logo is recorded, the previous user's logo will be erased.
Procedure
1Project the image that you would like to use as a user's logo,
and then press the [Menu] button on the remote control.
2Select the "User's Logo" menu,
and then press the [Enter]
button.
Tip :
If keystone correction or E-Zoom have been
carried out, they will be canceled when the
"User's Logo" menu is selected.
3Select "Yes" in the sub-menu,
and then press the [Enter]
button.
Tip :
When the [Enter] button is pressed, resized
display is cleared. As a result, the display
size changes between when images with
resolutions other than those of panel pixels of
this projector are being projected and when
video images are being projected.
4The image to be recorded and a
selection marquee box will be
displayed. Move the marquee
box to select the part of the
image to use.
Press the [], [], [] and [ ]
buttons to select the part of the image
to use as the user's logo, and then
press the [Enter] button.
Tip :
The size that can be registered is 480 × 360 dots.
Execute
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
[ ]: Execute [Menu]: Exit
[ ]: Select
Accept the present image as a
User's Logo
user's logo?
YES NO
[ESC]: Return[ ]: Select [ ]: Execute [Menu]: Exit
[ESC]: Return[ ]: Move[ ]: Set [Menu]: Exit