71
EMP-735 User’s Guide
Images appear darkImages appear greenish/Images appear red-purplishNo sound can be heard•Is the lamp due for replacement?
When the lamp is nearly due for replacement, the image
will become darker and the colour quality will become
poorer. When this happens, the lamp should be replaced
with a new one. ( p.88)
•Has the image brightness been adjusted correctly?
"Video" - "Brightness" ( p.45, 46)
•Has the image contrast been adjusted correctly?
"Video" - "Contrast" ( p.45, 46)
•Are the image signal format settings correct?
If you have set either "Component Video (YPbPr )" or
"Component Video (YCbCr )" by selecting "Video" and
then "Input Signal" on the configuration menu when a
computer is connected, the projected images will appear
red-purplish. If you have set "Computer" by selecting
"Video" and then "Input Signal" on the configuration menu
when a component video is connected, the projected
images will appear greenish.
"Video" - "Input Signal"( p.45, 47)
•Is the audio source connected correctly?
( p.17, 23)
•Has the volume been adjusted to the minimum
setting?
( p.49)
•Is A/V Mute mode active?
The projector may be in A/V Mute mode. Press the [A/V
Mute] button on the remote control to cancel the A/V Mute.
( p.39)
When the Indicators Provide No Help