68
EMP-735 User’s Guide
•Are the cables connected correctly?
( p.14–22)
•Has the correct resolution been selected?
Set the computer so that the signals that are output are
compatible with this projector. Refer to the documentation
provided with your computer for details on changing the
settings. ( p.97)
•Have the "Sync. ", " Tracking " and "Position" been
adjusted correctly?
If the "Auto Setup" command in the "Video" menu is set to
"OFF", press the [Auto] button on the remote control to
adjust these settings. If the images have not been correctly
adjusted after using the automatic setup function and after
pressing the [Auto] button, adjust the settings manually
using the respective menus.
( p.34, 44)
•Is an extension cable being used?
If an extension cable is used, electrical interference may
affect the signals. Use the accessory cables and check if
this helps.
•Are the image signal format settings correct?
If a computer, component video or RGB video source is
connected to the projector, use the "Input Signal" command
in the "Video" menu to select the signal format which
matches the signal connected source. ( p.45, 47)
If a composite video or S-Video source is connected to
the projector, use the "Video Signal" command in the
"Video" menu to select the video signal format. ( p.47)
•Image is distorted
•Image contains
interference
When the Indicators Provide No Help