Epson EMP-735 The remote control does not work, The power does not turn off (after the [Power] button is pressed)

72
EMP-735 User’s Guide
The remote control does not work
The power does not turn off (after the [Power] button is pressed)
•Is the remote control light-emitting area facing
towards the remote control light-receiving area when
it is operated?
The operating angle for the remote control is approximately
±30º horizontally and approximately ±15º vertically.
( p.10)
•Is the remote control too far from the projector?
The operating distance for the remote control is
approximately 6 m (20 ft.). ( p.10)
•Is direct sunlight or strong light from fluorescent
lamps shining onto the remote control light-receiving
area?
•Has the battery insulating tape been removed?
(p.9)
•Is there battery in the remote control?
( p.86)
•Is the battery dead?
•Has the battery been inserted correctly?
( p.86)
•The Power indicator remains orange.
This projector is designed so that the Power indicator
remains lit even when after the power has been turned off.
The Power indicator will switch off when the power cable
is disconnected from the electrical outlet.
•The cooling fan does not stop.
After the [Power] button is pressed to turn off the power,
the cool-down period starts.
After this, the Power indicator changes to a steady orange,
and you can then disconnect the power cable from the
electrical outlet.
* The cool-down period lasts about 45 seconds. The actual
time will vary depending on the external air temperature.
Menu A/V Mute
E-Zoom
Freeze
Page upPage down
Power
ESCAuto
Enter
S-Video/Video
Color Mode
Comp/Easy MP
When the Indicators Provide No Help