36
EMP-735 User’s Guide

If flickering, fuzziness or interference appear

in images that are input from the computer,

and this cannot be fixed using automatic setup,

you will need to adjust the sync. manually

using the following procedure.

Procedure
1Press the [Menu] button on the

remote control, and then select

"Sync." from the "Video"

menu.

For details on this operation, refer to

"Using the Configuration Menus".

(p.58)
2Press the [ ] and [ ]buttons

to set the sync value so that

the flickering, fuzziness or

interference noise in the

projected images disappear.

The sync value increases or decreases

each time a button is pressed.

3After making the adjustment, press the [Menu] button to exit
the configuration menu.
Tip :
• If you adjust the sync without adjusting the tracking first, it will not be possible to get
the best adjustment results. Incorrect tracking adjustment may not be noticeable with
some types of picture. However, pictures with lots of lines and shading will tend to
show incorrect tracking adjustments more clearly, so be sure to check the tracking
adjustment first.
• It may also be possible to fix flickering and fuzziness by adjusting the brightness,
contrast , sharpness and keystone correction settings.

Adjusting the Sync

+
-
+
-
+
-
Color Mode Select
Video
Audio
Setting
User's Logo
Advanced
About
Position Adjust
Tracking 0
Sync . 0
Brightness 0
Contrast
Sharpness 0
Reset All
0
:
:
:
:
:
[Normal ]
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
:
Auto SetupReset
Execute
ON OFF
:
Select
:
Input Signal:
:
[Computer ]
+
-
+
-
+
-
Color Mode Select
Video
Audio
Setting
User's Logo
Advanced
About
Position Adjust
Tracking 0
Sync . 10
Brightness 0
Contrast
Sharpness 0
Reset All
0
:
:
:
:
:
[Normal ]
:
:
Input Signal
Auto Setup
Reset
Execute
ON OFF
:
:
Select
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
[Computer ]
Adjusting the Image Quality