35
EMP-735 User’s Guide

If vertical stripes appear in the projected

images, and this cannot be fixed using

automatic setup, you will need to adjust the

tracking manually using the following

procedure.

Procedure
1

Press the [Menu] button on the

remote control, and then select

"Tracking" from the "Video"

menu.

For details on this operation, refer to

"Using the Configuration Menus".

(p.58)
2Press the [ ] and [ ]buttons

to set the tracking value so

that the vertical stripes in the

projected images disappear.

The tracking value increases or

decreases each time a button is

pressed.

3After making the adjustment, press the [Menu] button to exit
the configuration menu.
Tip :
The image will flash when continuous tracking adjustment is carried out, but this is
normal.

Adjusting the Tracking

Color Mode
Video
Audio
Setting
User's Logo
Advanced
About
Position Adjust
Tracking 0
Sync . 0
Brightness 0
Contrast
Sharpness 0
Reset All
+
-
+
-
0
+
-
:
:
:
:
:
[Normal ]
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
Select
:
:
Input Signal
Auto Setup
Reset
Execute
ON OFF
:
Select
[Computer ]
:
+
-
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
Reset All Color Mode
Position
Tracking
Sync .
Brightness
Contrast
Sharpness
:
:
:
:
:
Select[Normal ]
0
0
0
0
1000
Adjust
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
Select
Input Signal
Auto Setup
Reset
:
:
Execute
ON OFF
[Computer ]
Adjusting the Image Quality