86
EMP-735 User’s Guide
Replacing Consumables
This section describes how to replace the remote control battery, the lamp and
the air filter.
Use the following type of battery as a replacement.
1 CR2025 lithium battery
Caution :
Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the
battery.
Procedure
1Remove the battery holder.
Whilst pushing the catch of the battery
holder inwards, pull the battery holder out.
2Remove the old battery and insert
the new battery.
Check the position of the (+) mark inside
the battery holder to ensure that that
battery is inserted the correct way.
3Insert the battery holder into the
remote control.
Push the battery holder in until it clicks.
Tip :
Dispose of used batteries in accordance with local
waste disposal regulations.
Inserting the Battery
Catch
Old battery
New
battery
mark
Maintenance