Epson EMP-740, EMP-732, EMP-737 manual List of ESC/VP21 Commands, Command List, USB connection, 113

List of ESC/VP21 Commands

User’s Guide

113

Command List

When a power on command is sent to the projector, the power will turn on and the projector will change to warm-up mode. When the power has turned on, a colon ":" (3Ah) will be returned.

When the projector executes a command, it returns a ":" and waits for the next command to be sent.

If command processing terminates with an error, the projector outputs an error message and then returns the ":" code.

USB connection

•Connector shape: USB (type B)

<At projector> <At computer>

	Item	Command
Power ON/OFF	ON	PWR ON
	OFF	PWR OFF
	Computer (Auto)	SOURCE 1F
	Computer	SOURCE 11
Signal selection	Component Video	SOURCE 14
	Video	SOURCE 41
	S-Video	SOURCE 42
A/V Mute ON/OFF	ON	MUTE ON
	OFF	MUTE OFF
	Black	MSEL 00
A/V Mute Selection	Blue	MSEL 01
	User’s Logo	MSEL 02

(type B)

*The [USB Type A] port (EMP-745/737 only) cannot be used as a USB hub.

*When issuing any of the above commands, tack a Carriage Return (CR) code (0Dh) on to the end.