Epson EMP-737, EMP-740, EMP-732 manual Projecting S-Video Images, Projecting Component Video Images

User’s Guide

Connecting to a Video Source

25

Projecting S-Video Images

Use a commercially-available S-Videogcable to make the connections.

Projecting Component Video Images

Use the optional component videog cable to make the connection. "Appendices: Optional Accessories and Consumables" sp.108

To S-Video output port

S-Video cable	To [S-Video] port
(commercially-available)

TIP

Use to connect the projector to a commercially available component video cable (RCA × 3, male).

To component video output port

Component video cable

(optional)

To [Computer/Component Video] port (blue)

If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be projected. sp.37

TIP

•The input source is determined automatically based on the input signals.

Some video signals may be reproduced with different colours from the original images. In such case, set the input source to "Component Video". sp.61

•If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be projected. sp.37