Epson EMP-740, EMP-732, EMP-737 manual Turning the Projector On, Connecting the Power Cable

Turning the Projector On

User’s Guide

35

Turn the power on to start projecting images.

CAUTION

Make sure you to read the separate Safety Instructions/World-Wide Warranty Terms before projecting images.

Connecting the Power Cable

TIP

When the "Extended" - "Operation" - "Direct Power ON" menu item is set to "ON", a confirmation buzzer sounds and the projector's power turns on as soon as the power plug is inserted into the electrical outlet, and projection will start. sp.65

The power for the equipment that is connected to the projector should be turned on beforehand.

PROCEDURE

1	Check that the power is turned off for the projector
	and all components connected to the projector.
2	Connect the computer or other video source to the
	projector. sp.20, p.24

4 Connect the accessory power cable to the projector.

Check that the power cable connector is facing the same way as the power inlet on the projector, and then insert the power cable connector securely into the projector.

5	Connect the other end of the power cable to an
	earthed electrical outlet.

The Power indicator will light orange.

Lit orange

3 Remove the lens cover.

Hold the lens cover by the knob in the middle of the cover and remove it.