Manuals / Epson / Computer Equipment / Projector

Epson EMP-732 Disconnecting a USB Device from the Projector, From the projectors USB TypeA port

Models: EMP-740 EMP-732 EMP-737

1 121
Download 121 pages 65 b
Page 31
Image 31

Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-745/737 only)

Disconnecting a USB Device from the Projector

After projection has finished, disconnect the USB device from the projector by following the procedure below.

PROCEDURE

1

Position the cursor with the "EJECT" button on the

 

CardPlayer screen and press the [Enter] button on

the remote control to close CardPlayer. s"Showing the Presentation (Using the CardPlayer)" in the EasyMP Operation Guide

CAUTION

Make sure you shut down CardPlayer first before disconnecting a USB cable or a USB storage device from the projector. If you do not shut down CardPlayer before disconnecting the USB device, CardPlayer may no longer operate correctly.

2

Disconnect the USB cable or USB storage device

 

from the projector's [USB TypeA] port.

CAUTION

When a USB-compatible hard disk drive is connected, disconnect the hard disk drive or turn the power for the hard disk drive off before turning the power for the projector off. If this is not done, it may cause problems with the projector.

User’s Guide

30

Page 30 Page 32
Page 31
Image 31
Epson EMP-732, EMP-740, EMP-737 Disconnecting a USB Device from the Projector, Position the cursor with the Eject button on
Page 30 Page 32