Manuals / Epson / Computer Equipment / Projector

Epson EMP-732, EMP-740, EMP-737 manual Turning the Power On and Projecting Images

Models: EMP-740 EMP-732 EMP-737

1 121

Download 121 pages 65 b

Page 37

Image 37

User’s Guide

Turning the Projector On

Turning the Power On and Projecting Images	3	Press the [Power] button on either the projector's
		control panel or the remote control to turn the
TIP		projector's power on.
TIP		A beep will sound to indicate that the projector is starting up.
The Password Protect setting may cause the password entry screen to
		The Power indicator starts to flash green as the projector warms
be displayed each time the power is turned on.		up, and an image begins to appear.
If this happens, enter the password. sp.31		Changes from flashing to lit green
		Changes from flashing to lit green

PROCEDURE

1	Check that the Power indicator has stopped flashing
	and is lit orange.

Lit orange

Remote control

TIP

If the Power indicator is flashing green, operation of the [Power] buttons is disabled.

2	Turn the power on for all equipment connected to the
	projector.

For a video source, press the [Play] button at the video source to start playback if necessary.

Page 37

Image 37

Epson EMP-732, EMP-740, EMP-737 manual Turning the Power On and Projecting Images

Contents

User’s Guide Projector Features Direct Power On Projector Features Easy to OperateOperation Lock Large-volume USB Storage is Available to Use Projector Features Network SupportContents Specifications MaintenanceGlossary AppearancePart Names and Functions Before Using the ProjectorFront/Top Part Names and FunctionsControl Panel Rear Lamp cover sp.101 BaseAir filter air intake vent sp.99, p.104 Air intake vent sp.99Remote Control Replace the battery cover Remove the battery cover Before Using the Remote ControlInserting the Batteries Insert the batteriesUsing the Remote Control Using the Remote Control and Remote Operating RangeBefore Using the Remote Control Remote Operating Range Operating angle horizontal When suspended from the ceilingOperating angle vertical Setting Up the Projector InstallationFront/ceiling projection Screen Size and Projection Distance InstallationInserting and Removing Cards EMP-745/737 only InstallationPress the eject button to the left of the card slot RemovalPress the eject button again Inserting and Removing Cards EMP-745/737 onlyCard Slot Access Lamp Status Access Lamp StatusWireless LAN Card Access Lamp Status Eligible Computers Connecting to a ComputerProjecting Images from a Computer Connecting to a ComputerIf the Monitor Port is a Mini D-Sub 15-pin Port Example Computer Mouse used Applicable cable Right click Drag and drop Moving the mouse pointer Left clickProjecting Composite Videog Images Connecting to a Video SourceProjecting S-Video Images Connecting to a Video SourceProjecting Component Video Images Projecting RGB Video Images Playing Sound from Video Equipment If the video signals are being input to the Video portPlaying Sound from External Speakers EMP-745/737 only Connecting USB Devices Position the cursor with the Eject button on Disconnecting a USB Device from the ProjectorCardPlayer screen and press the Enter button on Disconnect the USB cable or USB storage deviceWhen Password Protect is enabled Preventing theft Password ProtectWhen Power on Protect is enabled on If the Timer Setting is for One Hour or More Setting Password ProtectWhen User’s Logo Protect is enabled on Hold down the Freeze button for approximatelyTimer setting allows you to specify the time interval Turn Power on Protect onFor password prompt Enter the passwordBasic Operations Turning the Projector On Connecting the Power CableTurning the Power On and Projecting Images If more than one external device is connected to Projector, use the remote control or projector controlPanel buttons to select the image source to be Projected while referring to the following tablePress the Power button Turn the power off for the signal sources that arePress the Power button once more Turning the Projector OffIf the projector is not being used, it is recommended That you unplug the power cable from the electricalOutlet Attach the lens coverFocusing the Screen Image Adjusting the Screen ImageAdjusting the Image Size Zoom Function Adjust by turning the zoom ringSeen from the side Adjusting the Screen ImageSeen from above Foot adjust lever Front Manually Correcting Keystone Distortion Adjusting Computer Images and RGB Video Images Adjusting the Image QualityAutomatic Setup After making the adjustment, press the Menu button Adjusting the TrackingTo exit the configuration menu Adjusting the Image QualitySignal configuration menu Adjusting the SyncProjectors control panel, and then select Sync. from Dynamic Presentation Theatre Blackboard sRGB Living Room Selecting the Projection Quality Colour Mode SelectionAdjusting the Volume Advanced Operations Mute Functions for Enhancing ProjectionPress the A/V Mute button Press the Freeze button FreezeAspect ratio changes each time the Resize button is pressed Functions for Enhancing ProjectionPress the E-Zoom button ZoomMove the cross to the area of the image that is to be Enlarged or reducedTilt the button to move the pointer icon Pointer functionPress the Pointer button Operation Button Lock Function Using the Configuration Menu Functions List of Functions Using the Configuration Menu FunctionsImage Menu RGB Component videog/ Composite videog/ S-Videog Using the Configuration Menu Functions Computer/RGB video Signal MenuComponent videog Composite videog/ S-Videog OFF Setting MenuSp.28 Message Extended MenuBackground Color Startup ScreenSleep Mode Direct Power onUsing the Configuration Menu Functions Info Menu Sp.33 Reset MenuConfirm the selection Using the Configuration MenusPress the Menu button Select a menu itemExample Select a sub-menu item Change the settingClose the menu Troubleshooting Press the Help button Using the HelpRepeat the operations in steps 2 and 3 to proceed Using the HelpThrough the menu to more detailed items Reading the Indicators Problems SolvingPower indicator lights red Problems Solving Lamp or Temp indicator flashes orangeNormal When the Indicators Provide No Help For EMP-745/737 only Only when projecting computer images Problems relating to imagesOnly when projecting images Only when projecting images From a video sourceDoes the mode match the frequency Is Sleep Mode set to ON?Resolution of the image signals? Projection stops automaticallyLaptop computer or computer Only when projecting images fromWith a built-in LCD screen Have the Sync.g and Trackingg settings Has the correct resolution been selected?Been adjusted correctly? Computer and RGB video signals onlyHas the Resize been set correctly? Zoom function? Has the Position setting been adjustedIs the image still being enlarged by Correctly?Has the image brightness been adjusted Do the input signal settings match the signalsHas the image contrastg been adjusted Has the colour been adjusted correctly?Problems when projection starts Other problems When connected to a wired LAN Correct ? Installed to the computer?Has EMP Monitor function been correctly Have all projectors that are to be monitoredLAN in easy connection mode When connected to a wirelessWhen connected to a wireless LAN Is the ESSIDg setting correct? Is the LAN card you are using 802.11g orAccess point and the projector? Is there an access point manufactured byFor Macintosh For Windows Projector detection error Network settings are being madeProjectors power is not turned on Select a connecting projector from the listCheck network settings and restart Communication error occurred. Do you wantReduce resolution and retry To retry connection?Cannot find a projector of the specified IP Image transfer slows if PC resolution is higherThan XGA 1024 ⋅ 768 pxl. Do you want to Continue?Password is incorrect Disk full while accessingContains an invalid path Is the path name containing the scenario113 Specifications 116115 118Cleaning MaintenanceCleaning the Projectors Surface Cleaning the Air Filters and Air Intake VentMaintenance Lamp Replacement PeriodReplacing Consumables 100Buzzer sounds, and then disconnect the power cable Turn off the projectors power, wait until the coolReplacing the Lamp Down period has ended and a pip-pip confirmationInstall the new lamp Take out the lamp Install the lamp cover102 Select Lamp-Hours Reset from the Reset menu Resetting the Lamp Operating TimeThen press the Enter button Select Yes and then press the Enter buttonReplacing the Air Filter Install the new air filterDown g period has ended and a pip-pip Remove the air filterSelect User’s Logo from the Extended menu, Saving a Users Logo105 Image to be recorded and a selection marquee Select Yes in the sub-menu, then press the EnterBox will be displayed. Move the marquee box to select Part of the image to useSelect Yes at the confirmation screen, and then Select the zoom rate in the Zoom rate setting screenPress the Enter button 107Optional Accessories Optional Accessories and ConsumablesConsumables 108109 Glossary110 Glossary111 WPA XGA 112Command List List of ESC/VP21 CommandsUSB connection 113USB Connection Setup Computer/RGB Video List of Supported Monitor DisplaysComponent Video/RGB Video Composite Video/S-Video116 Specifications117 Specifications118 AppearanceDeclaration of Conformity 119120 General Notice

Turning the Power On and Projecting Images

projector's power on.

and is lit orange.

projector.