Epson EMP-732, EMP-740, EMP-737 manual Adjusting the Volume

Adjusting the Volume

The volume of the projector's built-in speaker can be adjusted as follows.

PROCEDURE

Press the [Volume] buttons on the remote control or the [ ] and [ ] buttons on the projector's control panel to adjust the volume.

When the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [] side, the volume decreases.

The volume gauge appears on the screen when the volume is being adjusted.

Remote control Projector

TIP

•If the value displayed in the gauge on the screen stops changing when the volume is being adjusted, it indicates that the limit for volume adjustment has been reached.

•Volume adjustments are stored separately for each input source. •The volume can also be adjusted using the configuration menu. sp.62

User’s Guide

48