Configuration Menu Functions

Output Scaling *1

(Setting is not possible when composite video, S-Video or analogue-RGB signals are being input.)

•When component video or RGB-video signals are being input Normal (92% display) : Input signals are projected at the normal image size. TVThis changes the display area (the part of projected images).

images are displayed at 92% size.

Larger (100% display) : The areas at the top, bottom and sides of images that cannot normally be seen are inserted and projected. Interference may occur at the top or bottom of the images depending on the image signal.

•When the [HDMI] port is connected

Auto : Signals are automatically projected at 100% or 92% size depending on the input signals. (Not displayed when the equipment's DVI port is connected to the projector's [HDMI] port.)

Normal (100% display): Input signals are projected at the full image size.

Smaller (92% display) : The edges of the images are truncated when projected. Select this option if there is interference at the top or bottom of the images.

Setup Level *1

(Setting is only possible when composite video or S-Video signals in NTSC format are being input or component video has been set. Setting is not possible when signals are being input from the [HDMI] port.)

If using products designed for destinations such as the United States or South Korea that have different black level (setup level) settings, use this function to obtain correct images. Check the specifications of the connected equipment when changing this setting.

DVI-Video Level *1

(Setting is only possible when RGB video or computer signals are being input from the [HDMI] port.)

If the projector's [HDMI] port is connected to the DVI port of a DVD player or similar equipment using an HDMI/DVI cable, set the video level for the projector to match the video level that has been set at the DVD player. The setting at the DVD player can be either Normal or Expand.

Normal

Auto

0%

(Varies depending on country of purchase)

Normal

Configuration Menu

Screen

Default setting

Position *1

(Setting is not possible when signals are being input from the [HDMI] port.)

Use , , and to move the display position for images.

Zoom Caption *1

If aspect is set to "Zoom" when viewing images with subtitles, change the setting as follows so that the subtitles are displayed. The vertical size and the display position can both be adjusted together.

•Vertical SizeProjection areaUse "Vertical Size" to reduce the image size.

The vertical size of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

image is reduced so that the

 

 

 

 

 

 

 

 

subtitles are displayed.

 

 

 

 

 

 

 

 

•Zoom Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The whole of the image is

 

 

 

 

 

 

 

 

Subtitle section

 

Use "Zoom Position" to

moved up so that the

 

 

 

 

change the display position

subtitles are displayed.

 

 

 

of the image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Minimum value (0)

Median value (0)

*1 The setting values are stored separately for each image source and signal type.

19