Epson EMP-TW500 User’s Logo, On-ScreenDisplay

Configuration Menu Functions

Button Illumination

•ON : The area around the control panel buttons and characters light when the projector's power is turned on. This allows you to operate the projector in a

dark room.

•OFF : When set to "OFF", the lights for the area around the control panel buttons and ON characters are all turned off while images are projected.

	User’s Logo	Default setting

You can record your favorite image as a user's logo.

The logo will be projected when projection starts and when using the blank function. When a user's logo is recorded, the previous user's logo will be erased. Follow the instructions on the screen to record a user ’s logo.

Selection frame

Record

Move the selection frame so that	Select the display ratio.
the area of the image to be
recorded is inside the frame.

•The image will be displayed in dot format while the selection frame is displayed, therefore the display size may change.

•The size of the recorded image is 480 ⋅ 360 dots.

•Once a user's logo has been recorded, you cannot return the logo to the default setting.

•To use the recorded user's logo, set "Background Color" to "Logo".

On-Screen Display				Default setting
Menu Position
Press , ,	and	to specify the menu display position.		Center
Navigation Bar
This sets whether the navigation bar for the configuration menus is displayed (ON) or				ON
not displayed (OFF).				ON
not displayed (OFF).
Menu Color
The colour for the main configuration menu (full menu) and the navigation bar can be
selected as follows.	• Color 2 :Blue		• Color 3 : Green • Color 4 :Red
• Color 1 :Grey	• Color 2 :Blue		• Color 3 : Green • Color 4 :Red	Color 1
• Color 5 :Purple

Message

This sets whether the following message is displayed (ON) or not displayed (OFF).

•Item names such as Image Signal, Color Mode and Aspect when memory settings are

	retrieved	ON
	•Messages such as when no image signals are being input, when an incompatible	ON

	signal is input, and when the internal temperature rises
	Background Color
	Selects the screen status for the start-up screen (the image to be projected when
		Black
	projection starts) and the screen when the blank function is on.	Black

Configuration Menu

21

Contents

Page About The Manuals and Notations Used Unpacking and Installation Guide Safety Instructions/World-WideWarranty Terms Setup Guide User’s Guide (this manual) Contents Features of the Projector Equipped with a wide-anglelens shift function Adjusting the hue and saturation of colours Wide range of brightness adjustments Electronic zoom and focus adjustment A variety of image setting functions Part names and Functions Remote Control •Remote control light-emittingarea •Indicator •Menu button p.23 •Memory button p.12 Rear •[Video] port Setup Guide •[HDMI] port Setup Guide HDMI ] port Appearance Basic Image Quality Adjustments Selecting the Color Mode Selecting the Image Aspect Basic Image Quality Adjustments Advanced Color Adjustments Abs. Color Temp Flesh Tone Adjustments Abs. ColorFlesh toneTempadjustment./Flesh Tone RGB Image Quality Adjustments Basic (Memory save) (Memory save) (Memory Page Configuration Menu Functions Configuration Menu "Image" menu Picture Quality Color Adjustment Color Mode *1 Memory: Standard/Advance Last Memory *1 Auto Setup *1 "Setting" menu Advanced Screen Operation User’s Logo On-ScreenDisplay Input Signal Language "Reset" menu Lamp-HoursReset Memory Reset All Reset Using the Configuration Menus Displaying a menu Selecting a menu item Changing settings When setting is complete Preparation for Using Cinema Color Editor Uninstalling Cinema Color Editor Select Uninstall Click [Uninstall] Connecting to a Computer Connection using a network cable Connection using a USB cable or RS-232Ccable Connection settings at the projector (when using a network connection) Use and to select the item to be set, and then press Setting details Using Cinema Color Editor Starting Cinema Color Editor Click to go to picture Adjusting picture quality Operating the projector Saving adjustments/LoadingSavingadjustmentstments/Loadingfrom file adjustments from a file Saving customised settings into memory Saving adjustment values into memory into a memorySavingarea customised settings into memory Retrieving saved memory settings Click the "Standard" or "Advance" tab to select the type of memory Saving projector memory settings into a computer as a memory data file Loading memory data files from a computer into projector memory Changing a memory area names Problem Solving Internal problem Sensor Lamp problem Standby mode Projection in progress Warm-upin progress Cool-downin progress Problems relating to images Have you pressed the [Power] button Was the indicator lit orange Are the cables connected correctly Has the correct video input port been selected Are the image signals being Is an extension cable being used Have the "Sync." and "Tracking" settings been adjusted correctly Has the image Contrast Has the colour been adjusted Have the colour intensity and tint been adjusted correctly? colour and tint Only when projecting images from a video source Problems when projection starts Is "Operation Button Lock" set to "ON indicator lit orange Do the indicators turn off and Problems with network connections Are the projector and the computer correctly connected to the network Has the projector been set up Maintenance Consumable Replacement Periods Air Filter Replacement Period Lamp Replacement Period Appendix Replacing Consumables Replacing the Air Filter Replacing the Lamp Resetting the Lamp Operating Time Page Optional Accessories List of Supported Monitor Displays Specifications Compatible computers for using Cinema Color Editor RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page General Notice: