Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW500 Problems when projection starts, Problems with the remote control, button, to "ON, touched, operated, correctly, from the projector, indicator lit orange

1 56

Download 56 pages, 3.53 Mb

Problem Solving

Problems when projection starts

Power does not turn on

Have you pressed the [Power] Press on the remote control or on the projector's control panel. button?

Is "Operation Button Lock" set If the "Operation Button Lock" menu command is set to "ON", all

to "ON"?buttons on the projector's control panel are disabled. Press on the remote control.

"Setting" - "Operation" - "Lock Setting" - "Operation Button Lock" p.20

Is the indicator lit orange? Disconnect the power cable and then reconnect it. Setup Guide Check the circuit breaker to see if power is being supplied.

Do the indicators turn off and Turn the power off, disconnect the power cable and then reconnect it. If

on when the power cable is this does not solve the problem, there may be a problem with the power

touched?cable. Then contact your dealer or the nearest address provided in the "International Warranty Conditions" of the Safety Instructions/World- Wide Warranty Terms booklet.

Problems with the remote control

The remote control does not work

Is the remote control light-	Face the remote control towards the remote control light-receiving area.
emitting area facing towards	The operating angle for the remote control is approximately ±30º
the remote control light-	horizontally and approximately ±30º vertically.
receiving area when it is	Setup Guide
operated?

Is the remote control too far	The operating range for the remote control is approximately 10m.
from the projector?	Setup Guide

Is direct sunlight or strong	Set the projector up in a location where strong light will not shine onto
light from fluorescent lamps	the remote control light-receiving area.
shining onto the remote
control light-receiving area?

Are the batteries dead, or have	Insert new batteries, while making sure that they face correctly.
the batteries been inserted	Setup Guide
correctly?

38

Contents

Page About The Manuals and Notations Used Unpacking and Installation Guide Safety Instructions/World-WideWarranty Terms Setup Guide User’s Guide (this manual) Contents Features of the Projector Equipped with a wide-anglelens shift function Adjusting the hue and saturation of colours Wide range of brightness adjustments Electronic zoom and focus adjustment A variety of image setting functions Part names and Functions Remote Control •Remote control light-emittingarea •Indicator •Menu button p.23 •Memory button p.12 Rear •[Video] port Setup Guide •[HDMI] port Setup Guide HDMI ] port Appearance Basic Image Quality Adjustments Selecting the Color Mode Selecting the Image Aspect Basic Image Quality Adjustments Advanced Color Adjustments Abs. Color Temp Flesh Tone Adjustments Abs. ColorFlesh toneTempadjustment./Flesh Tone RGB Image Quality Adjustments Basic (Memory save) (Memory save) (Memory Page Configuration Menu Functions Configuration Menu "Image" menu Picture Quality Color Adjustment Color Mode *1 Memory: Standard/Advance Last Memory *1 Auto Setup *1 "Setting" menu Advanced Screen Operation User’s Logo On-ScreenDisplay Input Signal Language "Reset" menu Lamp-HoursReset Memory Reset All Reset Using the Configuration Menus Displaying a menu Selecting a menu item Changing settings When setting is complete Preparation for Using Cinema Color Editor Uninstalling Cinema Color Editor Select Uninstall Click [Uninstall] Connecting to a Computer Connection using a network cable Connection using a USB cable or RS-232Ccable Connection settings at the projector (when using a network connection) Use and to select the item to be set, and then press Setting details Using Cinema Color Editor Starting Cinema Color Editor Click to go to picture Adjusting picture quality Operating the projector Saving adjustments/LoadingSavingadjustmentstments/Loadingfrom file adjustments from a file Saving customised settings into memory Saving adjustment values into memory into a memorySavingarea customised settings into memory Retrieving saved memory settings Click the "Standard" or "Advance" tab to select the type of memory Saving projector memory settings into a computer as a memory data file Loading memory data files from a computer into projector memory Changing a memory area names Problem Solving Internal problem Sensor Lamp problem Standby mode Projection in progress Warm-upin progress Cool-downin progress Problems relating to images Have you pressed the [Power] button Was the indicator lit orange Are the cables connected correctly Has the correct video input port been selected Are the image signals being Is an extension cable being used Have the "Sync." and "Tracking" settings been adjusted correctly Has the image Contrast Has the colour been adjusted Have the colour intensity and tint been adjusted correctly? colour and tint Only when projecting images from a video source Problems when projection starts Is "Operation Button Lock" set to "ON indicator lit orange Do the indicators turn off and Problems with network connections Are the projector and the computer correctly connected to the network Has the projector been set up Maintenance Consumable Replacement Periods Air Filter Replacement Period Lamp Replacement Period Appendix Replacing Consumables Replacing the Air Filter Replacing the Lamp Resetting the Lamp Operating Time Page Optional Accessories List of Supported Monitor Displays Specifications Compatible computers for using Cinema Color Editor RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page General Notice: