Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW500 Maintenance, Cleaning, Cleaning the Lens, Cleaning the Air Filter, Cleaning the Projector Body

1 56

Download 56 pages, 3.53 Mb

Maintenance

This section describes maintenance tasks such as cleaning the projector and replacing consumables.

Cleaning

You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate.

Be sure to read the separate Safety Instructions/World-Wide Warranty Terms booklet for details on safe handling of the projector before cleaning.

Cleaning the Air Filter

If the airfilter becomes clogged with dust or the message "The projector is overheating. Make sure nothing is blocking the air vent, and clean or replace the air filter." is displayed, clean the air filter.

Turn the projector upside-down and use a vacuum cleaner to clean the air filter.

If the air filter becomes clogged with dust, it can result in overheating which may cause operating problems or reduce the operating life of the optical parts. It is recommended that you clean the air filter about once every three months. If using the projector in a dusty location, the air filter should be cleaned more often.

Cleaning the Projector Body

Clean the projector case by wiping it gently with a soft cloth.

If the projector is particularly dirty, moisten the cloth with water containing a small amount of neutral detergent, and then firmly wring the cloth dry before using it to wipe the projector case. Then wipe the body again with a soft, dry cloth.

Do not use any volatile substances such as wax, alcohol or thinner to clean the projector body. It can cause the body to warp and make the coating finish peel off.

Cleaning the Lens

Use a commercially-available air blower, or use a lens cleaning paper to gently wipe the lens.

Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged.

40

Contents

Page About The Manuals and Notations Used Unpacking and Installation Guide Safety Instructions/World-WideWarranty Terms Setup Guide User’s Guide (this manual) Contents Features of the Projector Equipped with a wide-anglelens shift function Adjusting the hue and saturation of colours Wide range of brightness adjustments Electronic zoom and focus adjustment A variety of image setting functions Part names and Functions Remote Control •Remote control light-emittingarea •Indicator •Menu button p.23 •Memory button p.12 Rear •[Video] port Setup Guide •[HDMI] port Setup Guide HDMI ] port Appearance Basic Image Quality Adjustments Selecting the Color Mode Selecting the Image Aspect Basic Image Quality Adjustments Advanced Color Adjustments Abs. Color Temp Flesh Tone Adjustments Abs. ColorFlesh toneTempadjustment./Flesh Tone RGB Image Quality Adjustments Basic (Memory save) (Memory save) (Memory Page Configuration Menu Functions Configuration Menu "Image" menu Picture Quality Color Adjustment Color Mode *1 Memory: Standard/Advance Last Memory *1 Auto Setup *1 "Setting" menu Advanced Screen Operation User’s Logo On-ScreenDisplay Input Signal Language "Reset" menu Lamp-HoursReset Memory Reset All Reset Using the Configuration Menus Displaying a menu Selecting a menu item Changing settings When setting is complete Preparation for Using Cinema Color Editor Uninstalling Cinema Color Editor Select Uninstall Click [Uninstall] Connecting to a Computer Connection using a network cable Connection using a USB cable or RS-232Ccable Connection settings at the projector (when using a network connection) Use and to select the item to be set, and then press Setting details Using Cinema Color Editor Starting Cinema Color Editor Click to go to picture Adjusting picture quality Operating the projector Saving adjustments/LoadingSavingadjustmentstments/Loadingfrom file adjustments from a file Saving customised settings into memory Saving adjustment values into memory into a memorySavingarea customised settings into memory Retrieving saved memory settings Click the "Standard" or "Advance" tab to select the type of memory Saving projector memory settings into a computer as a memory data file Loading memory data files from a computer into projector memory Changing a memory area names Problem Solving Internal problem Sensor Lamp problem Standby mode Projection in progress Warm-upin progress Cool-downin progress Problems relating to images Have you pressed the [Power] button Was the indicator lit orange Are the cables connected correctly Has the correct video input port been selected Are the image signals being Is an extension cable being used Have the "Sync." and "Tracking" settings been adjusted correctly Has the image Contrast Has the colour been adjusted Have the colour intensity and tint been adjusted correctly? colour and tint Only when projecting images from a video source Problems when projection starts Is "Operation Button Lock" set to "ON indicator lit orange Do the indicators turn off and Problems with network connections Are the projector and the computer correctly connected to the network Has the projector been set up Maintenance Consumable Replacement Periods Air Filter Replacement Period Lamp Replacement Period Appendix Replacing Consumables Replacing the Air Filter Replacing the Lamp Resetting the Lamp Operating Time Page Optional Accessories List of Supported Monitor Displays Specifications Compatible computers for using Cinema Color Editor RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page General Notice: