Problem Solving

Reading the Indicators

The projector is provided with the following three indicators which notify you of the operating status of the projector. The following tables show what the indicators mean and how to remedy the problems that they indicate.

*If the indicator does not light when the power is turned on, the power cable may not connected correctly or the power may not be supplied.

(Operation) indicator (Lamp) indicator

(Temperature) indicator

When the indicator is lit or flashing red Abnormal

: Lit : Flashing : Off

 

Red

Internal

Red

Fan problem/

Red

problem
Sensor

 

 

 

 

 

problem

 

Red

 

 

Red

Disconnect the power cable from the electrical outlet. Then contact your dealer or the nearest address provided in the "International Warranty Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.

Red

Red

Lamp problem/

Red Red

Lamp on error
Lamp cover is open

Check if the lamp is broken or if

 

 

 

the lamp cover is installed

 

 

error

 

 

 

 

securely. p.42

 

 

 

 

 

Replace the

If the lamp is

lamp and

not broken

then turn the

 

power on.

 

 

If the problem is still not solved after the lamp is replaced, stop using the projector and disconnect the power cable from the electrical outlet. Then contact your dealer or the nearest address provided in the "International Warranty Conditions" section of the Safety Instructions/World Wide Warranty Terms booklet.

If the lamp is

Contact your local dealer for further advice.

broken

 

Red

 

Internal

 

temperature error

 

 

 

 

(overheating)

 

Red

The lamp will switch off

 

automatically and

 

 

 

 

 

 

projection will stop. Wait

 

 

for approximately 5

 

 

minutes.

•When installing against a wall, leave a space of 20 cm (7.9 in.) or more between the projector and the wall.

•Clean the air filters if they are clogged. p.40

If the problem is not solved when the power is turned back on, stop using the projector and disconnect the power cable from the electrical outlet. Then contact your dealer or the nearest address provided in the "International Warranty Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.

When the or indicator is flashing orange Warning

: Lit : Flashing : Off

Orange Lamp replacement notification

The lamp is near the end of its operating life. Replace the lamp with a new one as soon as possible.

p.42

If you continue to use the old lamp, the possibility that the lamp may break will increase.

The indicator will vary depending on the projector status at the time.

 

 

 

High-speed cooling in progress

 

 

 

You can continue using the projector, but if the temperature rises too high again, the projector will be

 

 

Orange

switched off automatically. Follow the same remedy as for "Internal temperature error (overheating)"

 

 

above.

 

32

 

 

The

indicator will vary depending on the projector status at the time.