Using Cinema Color Editor

Make the desired adjustments. Select the memory area to be used.

The following two types of memory area are available, and up to 9 sets of adjustment settings can be saved in each. The type of memory area will vary depending on the "Color Adjustment" settings.

Standard

When "Color Adjustment" has been set with "RGB"

Advance

When "Color Adjustment" has been set with

"RGBCMY"

Select the memory area to be used for saving from the memory list, and then click [Register].

Retrieving saved memory settingsClick the "Standard" or "Advance" tab to select the type of memory.

After selecting the memory area to be retrieved from the memory list, click [Select].

The selected adjustment values will be applied to the images.

"Memory Edit" allows you to easily carry out the following processes.

Saving projector memory settings into a computer as a memory data fileLoading memory data files from a computer into projector memory

Computer files can be loaded into the projector's memory. You can store adjustment values in the computer without limitation in contrast to the projector's memory.

Load the values stored on your computer into the projector's memory area as needed.

Changing a memory area names

The preset names such as "Memory1" and "MemoryA" can be changed to names that are more descriptive of the memory area's contents. Even if you have stored a large number of memory settings in the computer, you can easily retrieve the desired settings.

Initialising memory

Memory settings that you no longer need can be selected and deleted one by one.

computer
Changing a memory area nameSelect the name to be changed from the memory list.Click [Memory Name Change].

In the "Memory Name Change" window, type in a memory name of up to 12 characters.

The characters that can be entered include alphanumeric characters, the space character and some punctuation characters.

e.g. ! " % & ' ( ) * + , - .

After typing in the name, click [OK].
Initialising a memory areaSelect the memory area to be initialised from the memory list.Click [Memory Reset].At the confirmation window, click [OK].
Adjusting projected images using a

31