5 RemoteControl | Control Panel |
1 
2 | 4 |
ON
3
ONIf there is a problem with projection even though the projector is set up and connected correctly, refer to s page 15, 35.
QTip: • If you set the "Direct Power On" to "On", the power of the unit will turn ON when the main power switch is turned ON, without having to press the power button of the remote control or the projector's control panel.
•The projector is equipped with a "Child Lock" function that prevents young children from accidentally turning the power on and looking into the lens (s page 31), and also an "Operation Lock" function that prevents
•When using above an altitude of about 1500 m, make sure you set the "High Altitude Mode" to "On". s page 32
•This projector is equipped with an automatic adjustment function that automatically optimizes it when a computer input signal is switched.
•If a laptop computer or a computer with a LCD screen has been connected to the projector, you may need to use keyboard or function settings to change the output destination. While holding down the 
key,
press 
(the key with a symbol such as 
/ 
on it). After the selection is made, projection will soon start.
s Computer documentation
Example of output selection
NEC |
|
|
| |
Panasonic |
| + |
| |
SOTEC |
|
|
| |
HP |
| + |
| |
Toshiba |
| + |
| |
IBM |
| + |
| |
|
|
| ||
SONY | ||||
|
|
| ||
DELL |
| + |
| |
Fujitsu |
| + |
| |
Macintosh | Set mirror setting or | |||
| display detection. | |||
| Depending on OS, you can | |||
| change the output selection | |||
| by pressing | |||
|
|
|
| |
14