Projecting Images

When the expected images are not projected

If more than one signal source has been connected, or if no images are projected, use the remote control or the projector's control panel buttons to select the signal source. For video devices, press the [Play] button on the video equipment first, then select the signal source.

Using the remote control

Using the control panel

Press the button that has the name of the port on it that

When you press

, the menu is displayed.

the desired signal source is connected to.

Use

or to select the signal source.

 

 

Press

to accept.

 

When projecting an image from the [Input A] port

The default setting is set to "Auto" to select appropriate signals automatically. However, if the colours appear unnatural, switch the image signal to match the equipment.

Using the remote control

 

 

 

 

 

 

 

 

 

 

Using the control panel

While projecting an image from equipment

 

 

 

 

 

 

While projecting an image from equipment

connected to the [InputA] port, press

 

 

to

 

 

 

 

 

connected to the [InputA] port, select "InputA"

 

 

 

 

display the menu.

 

 

 

 

 

 

 

 

and confirm to display the menu.

 

 

 

 

 

 

Use

 

 

 

 

 

or

 

 

 

to select the correct signal to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

match the equipment.

Press or to accept.

Basic Operations

Turning the power off

1 Turn the power off for the signal sources that are connected to the projector.

2 Press on the remote control or on the projector's control panel. If you press on the projector's control panel, the following message will be displayed.

Press again to continue.

3

4

When the projector has cooled down (takes about 30 seconds), turn off the main power switch.

Simply pressing or does not stop electricity consumption.

Attach the lens cover.

15