Viewing Images at a Preset Image Quality (Memory Function)
Saving image quality adjustments (Save Memory)
"Picture" menu
"Image" menu
Color Mode
Input Adjustment
Color Saturation
Tint
Sharpness
Color Adjustment
Auto Irish
Aspect
Zoom Caption
Tracking
Sync.
Position
Advanced
Auto Setup
White
Brightness/Contrast
Standard
Advanced
Abs. Color Temp.
Skin Tone
RGB / RGBCMY
Gamma
Displayed for input sources other than computer
Only displayed for Computer input (does not appear when signals from the [HDMI] input port are being input)
Vertical Size
Zoom Position
EPSON Super White
Progressive
Output Scaling
Setup Level
Settings that can be
saved in memory.
Configuration menus
s page 26
This can be used to save adjusted values for all of the configuration menu items on the left. The "Save Memory" command in the "Memory" menu is used to save the settings.
Image Quality Adjustments
The following describes how to save settings.
1 Adjust the desired settings that you would like to save in memory. |
|
|
2 Select "Save Memory" from the "Memory" menu and then press | or . |
|
3 Select a memory name from Memory1 to Memory9 to use for saving and then press | or . | |
The status of a memory area is indicated by the colour of the 
symbol to the left of the memory name as follows.
Green : Memory area is in use 
Grey : Memory area is not in use 
Orange : Selected In addition, if the memory has been registered, the colour mode selected when the memory was registered is displayed on the right side.
If you select a memory area that is already in use and press 
or 
, the existing contents will be erased and the current settings will be saved in their place.
To erase all memory contents, select "Reset Memory" from the "Memory" menu. s page 33
25