Epson EMP-TW520, EMP-TW600 User’s Logo, Display

Configuration Menu Functions

High Altitude Mode

A fan is set at a certain speed of rotation so as to bring down internal temperature. When using above an altitude of about 1500m, set to "On".

User’s Logo

You can record your favorite image as a user's logo.

The logo will be projected when projection starts and when using the blank function. When a user's logo is recorded, the previous user's logo will be erased. Follow the instructions on the screen to record a user's logo.

Selection

frame

Record

Move the selection frame so that	Select the display ratio.
the area of the image to be
recorded is inside the frame.

•The image will be displayed in dot format while the selection frame is displayed, therefore the display size may change.

•The size of the recorded image is 400 ⋅ 300 dots.

•Once a user's logo has been recorded, you cannot return the logo to the default setting.

•To use the recorded user's logo, set "Display Background" to "Logo".

Display

Menu Position

Press , , and to specify the position for the menus to be displayed.

Navigation Bar

This sets whether the navigation bar for the configuration menus is displayed (On) or not displayed (Off).

Menu Color

Selects the colour for the main configuration menu and the navigation bar.

• Color 1:Black

• Color 2:Purple

Message

This sets whether the following message displays appear (On) or don't appear (Off).

•Image signal, colour mode, aspect, test pattern and item name when memory settings are retrieved

•Messages such as when no image signals are being input, when an incompatible signal is input, and when the internal temperature rises

Display Background

Displays a menu for selecting the screen status for when using the blank function or when no image signal is input.

Startup Screen

This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On) or not displayed (Off).

If you change the setting, the new setting will take effect after the power has been turned off and the cool-down period is complete.

32

Contents

Page About the Manuals and Notations Used Types of Manual Notations used in this User’s Guide General information Meaning of "unit" and "projector Checking the Components Documentation Table of Contents Installing the Projector Basic Operations Image Quality Adjustments Configuration Menu Troubleshooting Appendix Features of the Projector Image apperance can be selected to match the projection environment (Color Mode) Sophisticated colour adjustment Equipped with a wide-anglelens shift function Equipped with 1.5x short throw zoom lens Advanced image quality adjustment functions A variety of image setting functions Part Names and Functions Front / Top Control panel Remote control Rear Base Appearance Setting up Adjusting the projection size Lens shift adjustment Projection Methods Connecting Image Sources Preparing the Remote Control Inserting batteries into the remote control Using the remote control Projecting Images Turning the power on and projecting images 3 ON When the expected images are not projected Turning the power off Adjusting the Projection Screen Correcting projector tilt Correcting keystone distortion (Keystone) Displaying a test pattern Basic Image Quality Adjustments Selecting the colour mode Selecting the aspect Advanced Colour Adjustments Skin tone adjustment Absolute colour temperature adjustment Gamma adjustment ■Adjusting from the gamma correction values ■Customized ("Adjust it from the image") ("Adjust it from the graph") RGB adjustment (Offset, Gain) ■Offset ■Gain Hue and saturation adjustment ■Hue Examining Image Quality Further Sharpness (Advanced) adjustment Auto Iris (automatic aperture) setting Viewing Images at a Preset Image Quality (Memory Function) Retrieving image quality adjustments (Load Memory) Saving image quality adjustments (Save Memory) Configuration Menu Functions List of configuration menus Configuration Menu "Picture" menu Color Mode*1 Input Adjustment *2 Color Saturation *2 Tint *2 "Image" menu Aspect *1 Zoom Caption *1 Tracking *1 Sync.*1 Position *1 Advanced Auto Setup "Settings" menu Keystone Operation User’s Logo Display Input Signal Projection Language "Memory" menu Save Memory Load Memory Reset Memory "Reset" menu Reset All Reset Lamp Hours Using the configuration menus 1 Displaying a menu Problem Solving Reading the indicators When the (warning) indicator is lit or flashing warning/problem When the (operation) indicator is lit or flashing normal When the indicators provide no help Problems relating to images ■The message "Not Supported." is displayed ■The message "No Signal." is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■ Image colours are not right ■ Images appear dark Problems when projection starts Problems with the remote control Maintenance Cleaning Cleaning the air filter Cleaning the projector case Cleaning the lens Consumable replacement periods Air filter replacement period Lamp replacement period Replacing consumables Replacing the air filter Replacing the lamp Resetting the lamp operating time Optional Accessories / Consumables List of Supported Monitor Displays Component Video Composite Video/S-Video Analog-RGBsignals/signals input to the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page General Notice: