Configuration Menu Functions

Input Signal

Video Signal

Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-Video] input port. If set to "Auto", the video signal format is set automatically.

If there is a lot of interference in the image, or if a problem such as no image being projected occurs even though "Auto" has been selected, select the correct signal format manually.

InputA

Change this setting depending on the type of signal that is being output from the video equipment that is connected to the [InputA] port.

If "Auto" is selected, appropriate signal is automatically set. If colours appear unnatural even though "Auto" is selected, select appropriate signal name in the menu.

D4/SCART

This sets the signal format in accordance with the signals being output from video equipment that is connected to the [SCART] port (in Europe) or [D4] port (in Japan).

Projection

This should be set in accordance with the method used to set up the projector.

• Front

: Select when the projector is set up in front of the screen.

• Front/Ceiling

: Select when the projector is set up in front of the screen and suspended from a ceiling.

•

Rear

: Select when the projector is set up behind the screen.

•

Rear/Ceiling

: Select when the projector is set up behind the screen and suspended from a ceiling.

Language

This sets the display language for messages and menus.

Reset

Adjustment values for the "Settings" menu functions are returned to their default settings, except for the "High Altitude Mode", "Input A", "D4/SCART", "Projection", and "Language".

Configuration Menu

"Memory" menu

Save Memory

This can be used to save "Picture" menu and the "Image" menu settings. s page 25

Load Memory

This retrieves settings previously saved using "Save Memory" s page 25

Reset Memory

This resets (erases) all settings that have been made using the "Save Memory".

33