For instructions on installing the printer software for Windows

3.1or Windows 95, see the Quick Setup Card. For instructions on installing the Windows NT driver software, see page 2-17.

Then follow the instructions in this chapter to access and use the Windows printer drivers.

You can use either of the following:

The EPSONScript driver for printing in the PostScript mode

The EPL-N1200 driver for printing in the LJ4 Plus (PCL5e) emulation

Follow the instructions below to access either driver. Instructions for using the EPSONScript driver start on page 2-4; instructions for using the EPL-N1200 driver start on page 2-7.

Accessing the Printer Driver

You can access the printer driver to check or change your print settings in two ways:

From your Windows application program Print or Print Setup option

From the Windows 95 Printer Properties utility or the Windows 3.1 or NT Control Panel.

The way you access the driver determines which programs and documents the settings will affect. Follow these guidelines:

If you want to change settings for one document only (or for documents printed with one application only), access the driver from the application program . The driver settings return to their defaults after you exit.

2-2Printing With the Windows Printer Drivers