4.Click OK to save your settings under that name and exit the driver.

5.Print your document.

Whenever you want to print a document with a particular group of settings, select the group name in the Default box; then click OK and print.

If you need to permanently delete a group of settings, select the name in the Default box and click the Delete button. (You cannot delete the Driver default group name.)

Installing and Using the Windows NT 3.51 Drivers

If you’re using Windows NT, you can install either the EPSONScript driver for printing in the PostScript mode, or the EPL-N1200 driver for printing in the LJ4 Plus (PCL5e) emulation mode.

Once you install the drivers, you can access them by following the steps on pages 2-2 to 2-4. The EPL-N1200 driver for Windows NT gives you the same options as the other Windows drivers; see page 2-7 for details.

The EPSONScript driver for Windows NT, however, offers a unique set of options for controlling your printer, such as smart underlining, printing thumbnail versions of your pages, and using paper from two different trays in one document.

The special EPSONScript settings are available on the following seven “tabs” in your software:

❑Page Setup

❑Visual Effects

❑Print Job

Printing With the Windows Printer Drivers 2-17