4-14 SelecType
Flamingo
Rev. C
A5 size SELEC.FM
11/5/98 Pass 0
LProof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______

Density

Adjusts the print density to make your printout lighter or darker.
Note:
Increasing the print density increases toner consumption. If you select
darker print, you may need to replace the imaging cartridge more often.

Top Offset

Makes fine adjustments to the ver tical position of the printing on
the page.
cCaution:
Be sure that the printed image does not exceed the edge of paper.
Otherwise, you may damage the printer.

Left Offset

Makes fine adjustments to th e horizontal position of the pr inting
on the page. This is useful for fine adjustment when you are using
the manual feed mode.
cCaution:
Be sure that the printed image does not exceed the edge of paper.
Otherwise, you may damage the printer.

T Offset B

Adjusts the vertical printing positio n o n the back side when
printing on both sides. Use this if the printout on the back side is
not where you expected. This item is available only when the
Duplex Unit is installed.

L Offset B

Adjusts the horizontal printing position on the back side when
printing on both sides. Use this if the printout on the back side is
not where you expected. This item is available only when the
Duplex Unit is installed.