5
Troubleshooting and Maintenance 5-23
Flamingo
Rev. C
A5 size TROUBLE.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
The position of the printout is not correct.
Make sure that you are using th e correct page length and marg in
settings in your application program.
Graphics don’t print correctly.
Make sure that your software prog ra m is set for the printer
emulation you are using. For example, if you are using th e LJ4
emulation, be sure that your graphics software is set for a L aserJet
4 printer.
Graphics require large amounts of memory; see “Memory
modules” on page 3-47 for more help.
SelecType does not function as expected.
Software programs override SelecT ype settings. Use software
settings instead of SelecType settings whenever possible.
Your settings may have been changed by your sof tware program.
Perform a factory reset (initialize) with the SelecType Init
function on the SelecType Setup Me nu. For more information, see
Chapter 4, “SelecType”.
You may not have reset the printer af ter making settings. Press
the ALT and Continue buttons at the same time to reset the printer
and enable the new settings.
Cover A will not close completely
The imaging cartridge is not installe d correctly. To properly
install the cartridge, see “Replacing the Imaging Cartridge” on
page 5-36.