4-28 SelecType
Flamingo
Rev. C
A5 size SELEC.FM
11/5/98 Pass 0
LProof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Auto CR
This specifies whether the printer pe rforms a carriage-return/
line-feed (CR-LF) operation whenever the printer position goes
beyond the right margin. If this setting is off, the printer does not
print any characters beyond the right mar gin and does not
perform any line wrapping until it receives a carriage-return
character. This function is handled automatically by most
software applications.
Auto LF
If you set this option to Off, the printer d oes not send an autom atic
line-feed (LF) command with each carriage-return (CR). If this is
set to On, a line-feed command is sen t with each carriage-return.
Set to On if your text lines overlap.
Bit Image
If you set this parameter to Dark or Light, the pr inter is able to
emulate the graphics densities s et with the printer commands. If
you select Dark, the bit image density is high, and if you select
Light, the bit image density is low.
If you select the BarCode setting, the printer co nverts bit images
to bar codes by automatically filling in any vertical gaps between
dots. This produces unbroken vertical lines that can be read by a
bar code reader. This mode will reduce the size of the image being
printed, and may also cause some di st ortion when printing bit
image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
This is useful for distinguishing between an uppercase O and a
numeric 0 when printing program listings, for example.