4.

Hold down the Num button on the remote control and use

 

 

the numeric keypad to enter a four digit password. (The default

 

 

setting is 0000.)

 

5.

When you see a confirmation message, reenter the password.

 

 

Then press the Menu button to exit the screen.

 

To set security options, access the Password Protect screen as

 

described on page 102, and then turn on any of the following options:

 

■

Power On Protect to prevent unauthorized use of the projector.

Hold down

 

After the projector is plugged in and turned on, you must enter a

 

 

password to use the projector. For details, see “Starting the

 

 

Projector with a Password” below.

 

■User’s Logo Protect to prevent your custom screen and display settings from being changed. None of the User’s Logo features in the Extended menu can be changed when the User’s Logo Protect function is enabled. For details on creating a custom screen, see page 104.

■Network Protect to lock the Network settings in the menu system.
Starting the Projector with a Password

When the password function is enabled, you see this screen when you plug in and turn on the projector:

Hold down the Num button on the remote control and use the numeric keypad to enter the four digit password. The password screen closes and projection begins.

note

If you leave the projector plugged in, the Password Protect Release screen will not appear. It appears only if you unplug and reconnect the power cord.

Hold down

Fine-Tuning the Projector 103