Epson G5200WNL Enabling WEP Encryption

Using Wireless Security Options

If you have installed the optional wireless LAN module (G5150NL and G5350NL only), you can use the following security options when connecting to the projector wirelessly: WEP encryption, WPA security, EAP-TLS certificate validation, or LEAP, EAP, or PEAP authentication. To set these security features on your wireless network, see your documentation or get help from your network administrator. See the following sections to enable the security option on your projector:

■“Enabling WEP Encryption” below

■“Enabling WPA Security” on page 87

■“Enabling EAP, LEAP, or PEAP Authentication” on page 88

■“Enabling EAP-TLS Certificate Validation” on page 89

Enabling WEP Encryption

1.Press Menu on the remote control, then highlight Network and press Enter.

2.Choose Network Configuration and press Enter.

3.Highlight Security and press Enter. Then press Enter again to display the security options:

4. Highlight WEP and press Enter.

Preparing the Projector to Present Through a Network 85