Epson G5200WNL and, Choose, Press the, and press, 116Managing Projectors, and enter the projector’s, 5.Do one of the following:, EMP Monitor Operation Guide

note

If you’re a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you’re monitoring.

note

You can also set e-mail alerts from EMP Monitor (see the EMP Monitor Operation Guide for more information).

5.Do one of the following:

■If your network assigns addresses automatically, turn on the DHCP setting.

■If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, and Gateway Address.

To enter numbers, use the pointer button on the remote control to highlight the number you want to input, then press

Enter.

6.When you’re done making all necessary changes, select Return, Setup complete, and then Yes to confirm that you want to save the changes. Press Menu to exit.

Using Projector E-mail Alerts

When this feature is enabled, the projector sends you an e-mail alert if it has any problems.

PowerLite Pro G5150NL and G5350NL

1.Press the Menu button on the remote control, select the Network menu, then press Enter.

2.Choose Network Configuration and press Enter.

116Managing Projectors